Kabinen-Kompatibilitätsprüfung
Find the Right Gladiator for Your Truck
Select your pickup truck or enter your truck bed measurements to see compatible Gladiator models.
Use this diagram as a reference. Hover over the ? icon next to each field for details on where to measure.
Measure your truck bed using the reference points below (A through K) and enter the values in millimeters. We will match your measurements against all Gladiator models.
Measure along the floor of your truck bed from the front wall (bulkhead) to the inside of the tailgate. This is the most important measurement for compatibility.
Measure the narrowest width at the floor level, between the two wheel arches (the bumps where the rear wheels are). This determines which cabin width fits your truck.
Measure along the top of the bed rail (the upper edge of the bed wall) from front to back. This is typically longer than the floor length (A).
Measure the inside width between the top bed rails (upper edges of the bed walls). This is wider than the floor width (B) because there are no wheel arches at the top.
Measure the width of one wheel arch (the bump that protrudes into the bed). Measure from the bed wall inward to where the arch ends.
Measure the height of the wheel arch from the bed floor to the top of the arch. This tells us how tall the wheel bump is inside your bed.
Measure the total height of the bed wall from the floor to the top of the rail, on the outside of the truck. Measure at the side, not at the wheel arch.
Measure how far the wheel arch protrudes above the bed rail level. Look at the arch from the side: how much does it stick up above the top edge of the bed wall?
Measure from the ground to the top of the bed rail. This is the total height when the truck is on flat ground. Important for determining the overall camper height when loaded.
Measure the total outer length of the bed from the outside of the tailgate to the back of the cab. This is the external measurement, not the interior floor length.
Measure the height of the tailgate opening when the tailgate is down. This is the vertical space between the bed floor and the top edge of the tailgate opening.
* At minimum, enter A (Floor Length) and B (Floor Width) for basic matching.
Your Truck Bed Specs
Important Notes Before You Begin
- The main difference between the Gladiator SH and SE models is their cabin width, despite having the same length. The SH model is produced without a bathroom, while the SE model includes a bathroom. When choosing between SH or SE, be sure to check your vehicle's wheelhouse measurements against the cabin's wheelhouse.
- Before purchasing, please compare the dimensions on our website with your existing pickup vehicle's bed size and make sure the cabin is suitable for your vehicle.
- For the Jeep Gladiator model, the cabin will be custom-manufactured with dimensions different from standard specifications. Preferences and configurations must be communicated to us in advance.
- When calculating standard cabin dimensions, any optional parts or add-ons in the bed of your pickup (added/assembled later at the factory) are not taken into account.
- Vehicle manufacturers may change cabin dimensions without notice.
- As pickup beds vary by brand and model, proper securing of the cabin and the use of protective measures at contact points are recommended for long-term comfort and vehicle protection.